• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

v0.10.13.x RC5 Testing

Status
Not open for further replies.
I found out that the new wallet version (and probably since last version) keeps locking up while the anon process is going. My wallet at first got 14 tdrk anonymized at 65% completion, and the wallet became locked, I'm wondering if the wallet thought the anon process was done. I unlocked the wallet (for 3000 seconds each time) and it began receiving more Darksend Denominate fees. But the wallet kept locking and I kept unlocking it several times before another 13 coins got anonymized, and right now it's at 73% completion. I'll probably have to keep unlocking it until it gets to 100%, or the Progress bar isn't working properly because I do have more than 15 anon tdrk now.

Edit: Btw, also sometimes I tried to unlock the wallet and it wouldn't. Will post in JIRA
My test wallet doesn't have encryption so there shouldn't be any issues with unlocking on my end.
 
My test wallet doesn't have encryption so there shouldn't be any issues with unlocking on my end.
Oh... That's really odd. I now changed my Options to 30 tdrk / 8 rounds. So far I have 0 anon tdrk.
Also, I submitted what I found last time to Jira DRK-72.
 
Oh... That's really odd. I now changed my Options to 30 tdrk / 8 rounds. So far I have 0 anon tdrk.
Also, I submitted what I found last time to Jira DRK-72.

Finished this morning with 18 ending. Looks like the darksend denoms happened at 06:42 and 06:48 so not too long ago.
 
Not going to lie, I do not care for the progress bar, especially if you start with lower rounds of anon and then bump it up. The progress bar before it starts getting through multiple rounds of denominating will show 50%, but as the rounds come through, that progress lowers down to a more reasonable starting point. The end user will see the 50% and then it lower to 25% and perhaps confuse them. This was the case of starting with 2498 DRK, 13 target, 4 rounds, then going to 88 DRK, 8 rounds.
 
Yes the progress bar calculation could be better. Right now if I have 1000 coins and I set 20 for anon with 8 rounds... once the process starts and say 7 coins make it to 1 round the progress reads 12% when really it should be closer to 4%...
 
Last edited by a moderator:
Not going to lie, I do not care for the progress bar, especially if you start with lower rounds of anon and then bump it up. The progress bar before it starts getting through multiple rounds of denominating will show 50%, but as the rounds come through, that progress lowers down to a more reasonable starting point. The end user will see the 50% and then it lower to 25% and perhaps confuse them. This was the case of starting with 2498 DRK, 13 target, 4 rounds, then going to 88 DRK, 8 rounds.
My wallet was set at 30 tdrk, 8 rounds. Overnight it got only 27 anonymized, 72% completion and the wallet seems halted. Are you currently testing 88 tdrk, 8 rounds? I've set my wallet to do the same.
 
Oh.. cute... My wallet got 27 tdrk anonymized at 6 rounds. A few minutes ago I then set the Options with 88 tdrk / 8 rounds. It hasn't changed. And now the wallet is locked... lol...

Edit: Oh it just popped up the small screen asking me to unlock the wallet.. Not bad..
 
My wallet was set at 30 tdrk, 8 rounds. Overnight it got only 27 anonymized, 72% completion and the wallet seems halted. Are you currently testing 88 tdrk, 8 rounds? I've set my wallet to do the same.
Yep, currently doing 88 tdrk through 8 rounds. I'm at work so I won't be able to see the progress, but I'll look at the transactions when I come home.
 
Yep, currently doing 88 tdrk through 8 rounds. I'm at work so I won't be able to see the progress, but I'll look at the transactions when I come home.
My wallet has been stalling. I changed it once to 101 tdrk / 8 rounds, got two DS Denominate fees, then the wallet stalled. Changed it back to 88 tdrk / 8 rounds, still the same, hasn't got any new anon coin. I'm wondering if it needs a 3rd client with the same amount to pair for the transaction.
 
My wallet has been stalling. I changed it once to 101 tdrk / 8 rounds, got two DS Denominate fees, then the wallet stalled. Changed it back to 88 tdrk / 8 rounds, still the same, hasn't got any new anon coin. I'm wondering if it needs a 3rd client with the same amount to pair for the transaction.


no , the third client pairing has not started yet. Also just came back from work and turned Darksend+ back on for my 20.000 and its denominating nicely...

edit : it anonymized everything to 8 rounds (541 coins got anonymized, 100% completion) except the 4096 / 2046 / 1024 amounts so i'm waiting to see when this will be splitted further..
 
****** PLEASE UPDATE TO v9.13.6 (Stable) OR 10.13.6 (RC) *******

- Added toggle off/on button to overview screen
- Updated wording for darksend messages
- Removed disable darksend checkbox from config screen
- Added "-enabledarksend" cli option
- Toggle button shows the basic configuration when started for the first time now
- Added tooltips for config screen
- Changed DS participants to three
- Bump minimum protocol to RC4
- Added a spork for enforcing masternode payments (this will ensure misconfigured pools break when we enable the spork)

XGDMFSDemQeDavynQtBhW_HPgmv0lOusO9Nzzx7yglGDVYy-8M6nn4tcEKlt54dNttC0a1nqF3VeO1iQ9hbPYQzPBAwHOsHK0ufvdkej-eWfIZlPlviDN0pQvSnShxbpTg

JD0PRzsWBFW_P1Y5NGbFnLIuFuvbSyMGbfhVbkM6GkEohvdSoqK69KoiAPoALD077GDVJOCUnk4Sn8AvuCiKNS64alGpY4N5PbzmqTQT6_XcX2w_47FNgtFx7hk0YAHcYA


iYzEy8mpaioSS11rZoPAZzrfwJqw4l1jn2lyVwRAivD9vWyu9xx5Uj6uZ4AZobnZ3W9-uraT9yEtYdaDsssAQYLVbi6UmKHrPrtTD0Ns9SFZwpTEXGol-yFAdtoeGqJbaA



Stable Binaries
http://www.darkcoin.io/downloads/master-rc5/darkcoin-qt
http://www.darkcoin.io/downloads/master-rc5/darkcoind

RC5 Binaries
http://www.darkcoin.io/downloads/rc5/darkcoin-qt
http://www.darkcoin.io/downloads/rc5/darkcoind
 
****** PLEASE UPDATE TO v9.13.6 (Stable) OR 10.13.6 (RC) *******

- Added toggle off/on button to overview screen
- Updated wording for darksend messages
- Removed disable darksend checkbox from config screen
- Added "-enabledarksend" cli option
- Toggle button shows the basic configuration when started for the first time now
- Added tooltips for config screen
- Changed DS participants to three
- Bump minimum protocol to RC4
- Added a spork for enforcing masternode payments (this will ensure misconfigured pools break when we enable the spork)

XGDMFSDemQeDavynQtBhW_HPgmv0lOusO9Nzzx7yglGDVYy-8M6nn4tcEKlt54dNttC0a1nqF3VeO1iQ9hbPYQzPBAwHOsHK0ufvdkej-eWfIZlPlviDN0pQvSnShxbpTg

JD0PRzsWBFW_P1Y5NGbFnLIuFuvbSyMGbfhVbkM6GkEohvdSoqK69KoiAPoALD077GDVJOCUnk4Sn8AvuCiKNS64alGpY4N5PbzmqTQT6_XcX2w_47FNgtFx7hk0YAHcYA


iYzEy8mpaioSS11rZoPAZzrfwJqw4l1jn2lyVwRAivD9vWyu9xx5Uj6uZ4AZobnZ3W9-uraT9yEtYdaDsssAQYLVbi6UmKHrPrtTD0Ns9SFZwpTEXGol-yFAdtoeGqJbaA



Stable Binaries
http://www.darkcoin.io/downloads/master-rc5/darkcoin-qt
http://www.darkcoin.io/downloads/master-rc5/darkcoind

RC5 Binaries
http://www.darkcoin.io/downloads/rc5/darkcoin-qt
http://www.darkcoin.io/downloads/rc5/darkcoind
CI-builds for v0.9.13.6-gc50784d

Windows 32bit:
http://bamboo.darkcoin.qa/artifact/DWD-DRK/QTL/build-118/gitian-win-darkcoin-bin/32/darkcoin-qt.exe
http://bamboo.darkcoin.qa/artifact/...tian-win-darkcoin-bin/32/daemon/darkcoind.exe
http://bamboo.darkcoin.qa/artifact/...coin-bin/32/darkcoin-0.9.13.6-win32-setup.exe

Mac OS X:
http://bamboo.darkcoin.qa/browse/DOD-DRK-99/artifact/QTL/gitian-osx-darkcoin/DarkCoin-Qt.dmg

Linux 32bit:
http://bamboo.darkcoin.qa/artifact/BL-DRK/QTL/build-97/gitian-linux-darkcoin-bin/bin/32/darkcoin-qt
http://bamboo.darkcoin.qa/artifact/BL-DRK/QTL/build-97/gitian-linux-darkcoin-bin/bin/32/darkcoind

Linux 64bit:
http://bamboo.darkcoin.qa/artifact/BL-DRK/QTL/build-97/gitian-linux-darkcoin-bin/bin/64/darkcoin-qt
http://bamboo.darkcoin.qa/artifact/BL-DRK/QTL/build-97/gitian-linux-darkcoin-bin/bin/64/darkcoind

CI-builds for v0.10.13.6-g03a9bad

Windows 32bit:
http://bamboo.darkcoin.qa/artifact/...arkcoin-rc-darkcoin-qt-bin/32/darkcoin-qt.exe
http://bamboo.darkcoin.qa/artifact/...coin-rc-darkcoind-bin/32/daemon/darkcoind.exe

Mac OS X:
http://bamboo.darkcoin.qa/browse/DOD-DRKRC-36/artifact/QTL/gitian-osx-darkcoin-rc/DarkCoin-Qt.dmg

Linux 32bit:
http://bamboo.darkcoin.qa/artifact/...tian-linux-darkcoin-rc-bin/bin/32/darkcoin-qt
http://bamboo.darkcoin.qa/artifact/...gitian-linux-darkcoin-rc-bin/bin/32/darkcoind

Linux 64bit:
http://bamboo.darkcoin.qa/artifact/...tian-linux-darkcoin-rc-bin/bin/64/darkcoin-qt
http://bamboo.darkcoin.qa/artifact/...gitian-linux-darkcoin-rc-bin/bin/64/darkcoind
 
no , the third client pairing has not started yet. Also just came back from work and turned Darksend+ back on for my 20.000 and its denominating nicely...

edit : it anonymized everything to 8 rounds (541 coins got anonymized, 100% completion) except the 4096 / 2046 / 1024 amounts so i'm waiting to see when this will be splitted further..
Oblox and I have been doing the same Options 88 tdrk to anonymize, 8 rounds. So far my wallet hasn't moved. Same thing last night we did with another set of amounts, I got my coin anonymized, Oblox didn't... So I'm thinking if there's more participants with the same pairing in the pool, the anonymization can go better.
 
ofc 10 minutes after posting my previous post Evan posted update 10.13.6 :)

Third client pairing in 10.13.6 : yes
GUI enhancements in 10.13.6 : yess
Added a spork for enforcing masternode payments (this will ensure misconfigured pools break when we enable the spork) : yesss
 
Just one quick question do we have cap of 1000DRK now? Can you anonymize more than 1K DRK?
 
I don't think there's a cap. The 5000 cap was lifted during RC4 testing, iirc.

Well the new settings do say, "...up to 1000 DRK" and that is why I am wondering. I could be interpreting it wrong but a clarification would be nice.
 
With update 10.13.5 my large input amounts (4096, 2048, 1024) dont seem to get splitted any further and wallet actually thinks it finished
the anonymization process.

Pls check if this happens perhaps in 10.13.6 as well with large wallets .. i will check it myself once i get flare's compiling,
 
Well the new settings do say, "...up to 1000 DRK" and that is why I am wondering. I could be interpreting it wrong but a clarification would be nice.
But it also says "You can change this...." It's just a default setting that you can anonymize "up to 1000", but it doesn't say that it is the max limit.
 
Status
Not open for further replies.
Back
Top