v0.10.16 - Onyx v2

[oaxaca]

Updated both local and remote.
Local QT reports my MN started successfully and has status "1"
Remote does not show itself on "masternode list"

EDIT
---------
Masternode List shows 1 "1" and 1 "0". Neither of them mine.

 

[UdjinM6]

masternode list is now completely empty for me on 16.5

 

[eduffield]

Yes, same issue. I'm updating few nodes. After restart they don't show on the list.

grep HotCold .darkcoin/debug.log Doesn't return result.

I seem to be having issues with my masternodes showing up in the list. When i start from the wallet it says its successful.

To clarify:

Starting up a hot/cold masternode requires that the network can propagate messages for the new protocol. That takes some time. However, if you're running a non hot/cold setup, your daemon will continue to attempt to propagate one until it can.

It just takes some time for the network to update. I'll add some code for the next release that will allow backwards compatibility of the masternode messages, that would be a huge improvement.

 

[RenegadeMan]

I just updated my MN. Seems to have come up properly but I'm only seeing three MNs on the masternode list on my VPS (including mine). The Darkcoin Masternode Ninja page seems to have lost almost all of the masternodes too. Based on previous comments, I'm aware the new version needs to propagate connections but is this right?

 

[RenegadeMan]

Anyone else having trouble getting onto Bitcointalk? I just can't get pages to load and it's not returning pings very well.

 

[jiggytom]

BCT site is down..also my amazon AWS keeps becoming unavailable. Maybe its a wider outage somewhere in the interwebz.

 

[jiggytom]

my VPS came back up...I guess it went down because when I putty'd back in darkcoind wasn't running. Odd. crap.

 

[fernando]

BCT site is down..also my amazon AWS keeps becoming unavailable. Maybe its a wider outage somewhere in the interwebz.

Bitcointalk also down for me.

 

[jiggytom]

timeoffset is -5 ...is that normal?

 

[oblox]

About a 1/5 of my masternodes won't have darkcoind stay running.

 

[HammerHedd]

I'm having trouble connecting to VULTR as well, so I'm guessing this is some sort of outage or larger routing problem. Let's all have a drink and wait 24 hours to see what shakes out.

 

[thelonecrouton]

my VPS came back up...I guess it went down because when I putty'd back in darkcoind wasn't running. Odd. crap.

ssh to your MN and run 'crontab -e'

If you get asked, select your text editor of choice, then add '@reboot /home/user/.darkcoin/darkcoind' to the end of the textfile that pops up. (Modify line to suit username and daemon location.)

Should restart darkcoind in the event of a brownout.

You can also add '@reboot /home/user/the-script-that-you-wrote-to-send-you-an-email-if-this-happens.sh'

edit: see also https://www.digitalocean.com/commun...simple-bash-script-to-restart-server-programs - replace apache2 with darkcoind, handy for restarting the daemon if it craps out by itself, although I've never had a problem with that.

 

[RenegadeMan]

Lots of weird stuff going on. My MN appeared to be running fine but I just did a "./darkcoind masternode list | grep <ipaddress>" and it returned "error; couldn't connect to server".

I've tried stopping and restarting darkcoind and now I can't get any response to "./darkcoind masternode list | grep <ipaddress>" (just brings a new command line with nothing, no error).

If I do "./darkcoind masternode list" I get only two listed (and neither are mine)

"185.7.80.116:9999" : 1
"104.156.252.222:9999" : 1

Something's not working properly I would say.

(BCT still offline too)

 

[jiggytom]

Lots of weird stuff going on. My MN appeared to be running fine but I just did a "./darkcoind masternode list | grep <ipaddress>" and it returned "error; couldn't connect to server".

I've tried stopping and restarting darkcoind and now I can't get any response to "./darkcoind masternode list | grep <ipaddress>" (just brings a new command line with nothing, no error).

If I do "./darkcoind masternode list" I get only two listed (and neither are mine)

"185.7.80.116:9999" : 1
"104.156.252.222:9999" : 1

Something's not working properly I would say.

(BCT still offline too)

I got the same "error couldn't connect to server"...I thought it was because my VPS went down but maybe darkcoind is just dying like Oblox. When I start up darkcoind again, and then go into my local wallet and do masternode start - that's when my IP shows up in my list. So if I add the cron job, won't I still have to go to my local wallet and run masternode start?

 

[thelonecrouton]

So if I add the cron job, won't I still have to go to my local wallet and run masternode start?

No, you should only have to do that once initially when there's a protocol version bump. Your MN AI should take care of itself otherwise.

 

[UdjinM6]

darkcoind just crashed on mainnet for me too... going back to 15.21....

EDIT: nothing unusual in debug.log

 

[RenegadeMan]

darkcoind just crashed on mainnet for me too... going back to 15.21....

EDIT: nothing unusual in debug.log

I've just reverted back to 15.21 too. It came up straight away and is running fine.

 

[Miner237]

My masternodes that were showing in the list and grepping 1 are now kicking offline. Like darkcoind is timing out and the process needs to be manually restarted.

I was having this problem on testnet, took about an hour or so and my MN would stop running.

 

[RenegadeMan]

I've just reverted back to 15.21 too. It came up straight away and is running fine.

And blow me down, a 1.25 DRK payment just came in 5 minutes after restarting my MN back on 15.21! It was due, but I would've thought it to be such an unlikely moment that a payment would happen in amongst all this updating and reverting!

 

[RenegadeMan]

BCT tweeted about 12 minutes ago that they're experiencing a DoS.

 

[darkwing]

BCT tweeted about 12 minutes ago that they're experiencing a DoS.

I suspected the start of the zombie apocalypse.

 

[thelonecrouton]

I suspected the start of the zombie apocalypse.

That's been underway for years...

 

[RenegadeMan]

I suspected the start of the zombie apocalypse.

You're definitely onto something darkwing. "Zombie apocalypse" is now trending on social media. Get ready for doesn't-matter-how-many-times-you-stab-them-they-keep-getting-up-again fighting in the streets....

 

[tungfa]

That's been underway for years...

the trolls are eating each other now (zombie style) ?!

 

[RenegadeMan]

the trolls are eating each other now (zombie style) ?!

It's a zombie troll army masterminded by shojayxt (I knew he was going to go bad again) and they're walking the streets looking for shops or businesses displaying the BTC sign. Then they go in, hold up the staff and demand they bring out the block chain ('cause these are shojayxt crypto zombie trolls that feed off the block chain) or else they'll start biting people and adding them to the zombie force. So far not one business has been able to satisfy them with a "block chain" and, consequently, the mob's just getting bigger. Frightening stuff!

 

[darklord1981]

Lots of weird stuff going on. My MN appeared to be running fine but I just did a "./darkcoind masternode list | grep <ipaddress>" and it returned "error; couldn't connect to server".

I've tried stopping and restarting darkcoind and now I can't get any response to "./darkcoind masternode list | grep <ipaddress>" (just brings a new command line with nothing, no error).

If I do "./darkcoind masternode list" I get only two listed (and neither are mine)

"185.7.80.116:9999" : 1
"104.156.252.222:9999" : 1

Something's not working properly I would say.

Exact same thing is happening for me. I can't get the MN back online.

 

[darklord1981]

The result from ./darkcoind masternode list is
{
"37.59.21.58:9999" : 1,
"178.62.172.195:9999" : 0
}

Neither is my IP.

 

[Miner237]

We are so used to "instant MN network updates" in testnet, that we forget that mainnet takes it time - 1200 nodes is a lot

With poolhash offline for the past month and drk.mn taking a little while to catch up his code with each change, what is the best reference point, the QT wallets or the MN themselves? my QT wallet only shows 2 MN on mainnet.

 

[oblox]

eduffield The new build is bleeding resources (CPU usage and memory) which is inevitably causing crashes. From darkcoind on my ubuntu instances to qt on my win7 system, nearly all have crashed.

 

[UdjinM6]

https://github.com/darkcoin/darkcoin/blob/master/src/darksend.cpp#L1989
this should be fixed because in other case that
https://github.com/darkcoin/darkcoin/blob/master/src/darksend.cpp#L2000
would never execute and also this
https://github.com/darkcoin/darkcoin/blob/master/src/darksend.cpp#L2003
will not work for nLiquidityProvider > 19