• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

v0.10.13.x RC5 Testing

Status
Not open for further replies.
I don't think high balance really matters. If you'd want to test 50 tdrk at 4 rounds, try it now. I've got my wallet set and it's "waiting in the queue".. Let's try it! thanks.
I would but I am at 49% on 6 rounds with 100.
 
Fantastic, maybe I'll have the inputs to finish my rounds. Then we can look at say 50 or so.
Have your 100 tdrk got anonymized? I've set 100 tdrk at 6 rounds, and so far the completion bar is only at 33%, DS is still waiting in queue. We might need another person to join in.
 
Have your 100 tdrk got anonymized? I've set 100 tdrk at 6 rounds, and so far the completion bar is only at 33%, DS is still waiting in queue. We might need another person to join in.

Nope, still sitting at 49% waiting on queue. Coin control has inputs with rounds 1 to 4 right now.
 
Nope, still sitting at 49% waiting on queue. Coin control has inputs with rounds 1 to 4 right now.
Hey, I asked someone else to join us, with 100 and 6 rounds... Now my wallet started to get more DS denomiate fees, and went from 33% to 48% now, so it seems the wallet is moving.. lol... How about you?
 
Has the 5000 DRK limit been reinstated?

a1tQAEZ.png


http://imgur.com/a1tQAEZ.png

edit: also would not work @ 3036 tDRK

edit2: 1036 tDRK did not work
Okay here is the scenario: I have 6036.414 tDRK and I decide to denom and anon 10 tDRK.
This as broken down into 1035 separate denominations
Anybody know the kb limit for a single transaction?
If I'm will to pay the transaction fee, why does it matter how "large" a transaction is?
This seems to be a huge limitation of the Cli

The denom worked fine. In the end I had 14.00000014 in anon

edit3: 536.41400000tDRK failed to send

edit4: 136.41400000 failed to send - this is just getting ridiculous

edit5: 36.41400000 failed to send - something is just really wrong here

edit6: 6.41400000 failed - I give up...........

edit7: 0.41400000 FAILED - REALLY????

MxYjKxA.png

http://imgur.com/MxYjKxA.png
 
Last edited:
We seem to be severely lacking in terms of people denominating on testnet right now. I think it would be best to try and have some coordination on the various test cases people have in mind. I realize that it's hard to get everyone around in the world on #darkcoin-test at the same time, but it should be easy enough to form some teams and have them focus on different areas. For example, I would like to be part of a team that focuses on some automated testing.
 
Hey, I asked someone else to join us, with 100 and 6 rounds... Now my wallet started to get more DS denomiate fees, and went from 33% to 48% now, so it seems the wallet is moving.. lol... How about you?
At 95%, looks like 187 anon.
 
At 95%, looks like 187 anon.
Cool... it works for you!!!!! But I'm still at 62% completion and only 40 drk anonymized. The other person has stopped his wallet due to some weirdness that happened to his wallet. I'm wondering why I've got only 40 drk (only 4 denominations at 10 drk each, and other amounts are still at 2 rounds). Not sure why now the wallet seems to be stalling.
 
Has the 5000 DRK limit been reinstated?

a1tQAEZ.png


http://imgur.com/a1tQAEZ.png

edit: also would not work @ 3036 tDRK

edit2: 1036 tDRK did not work
Okay here is the scenario: I have 6036.414 tDRK and I decide to denom and anon 10 tDRK.
This as broken down into 1035 separate denominations
Anybody know the kb limit for a single transaction?
If I'm will to pay the transaction fee, why does it matter how "large" a transaction is?
This seems to be a huge limitation of the Cli

The denom worked fine. In the end I had 14.00000014 in anon

edit3: 536.41400000tDRK failed to send

edit4: 136.41400000 failed to send - this is just getting ridiculous

edit5: 36.41400000 failed to send - something is just really wrong here

edit6: 6.41400000 failed - I give up...........

edit7: 0.41400000 FAILED - REALLY????

MxYjKxA.png

http://imgur.com/MxYjKxA.png

Sounds like a big issue. Make sure you post this on Jira so Evan sees it.
 
Sounds like a big issue. Make sure you post this on Jira so Evan sees it.

Have not visited Jire but I have already sent Evan the wallet.dat and debug. I am certain that it contains the needed information concerning this issue. I thank you Sir for your concern.
 
Installed the wallet to test on a 13" MacBook Pro. The Warning message that comes up upon first load is so large and long you actually can't see it all on the 1280x800 resolution. To make things worse I can't seem to find a way on the GUI to make it any smaller to actually click accept. Not sure if this is an issue or if we could maybe make that box a little wider. I think that 1280x800 though pretty low of a resolution is still something that it should be useable on.
 
Have not visited Jire but I have already sent Evan the wallet.dat and debug. I am certain that it contains the needed information concerning this issue. I thank you Sir for your concern.

Hey MangledBlue, JGCMiner was only trying to help... This has been requested by flare earlier in this thread:

I'd like to welcome all new testers to this thread, and point out that if you have found something that looks, feels and smells like a bug, to register at our JIRA bugtracker to report the bug.

--> http://jira.darkcoin.qa

That way the Dev Team can get hold of all bugs, while you as reporter are kept in the loop.

Thanks!
 
Installed the wallet to test on a 13" MacBook Pro. The Warning message that comes up upon first load is so large and long you actually can't see it all on the 1280x800 resolution. To make things worse I can't seem to find a way on the GUI to make it any smaller to actually click accept. Not sure if this is an issue or if we could maybe make that box a little wider. I think that 1280x800 though pretty low of a resolution is still something that it should be useable on.
Thanks for reporting, this is a known issue --> http://jira.darkcoin.qa/browse/DRK-12
 
Has the 5000 DRK limit been reinstated?

a1tQAEZ.png


http://imgur.com/a1tQAEZ.png

edit: also would not work @ 3036 tDRK

edit2: 1036 tDRK did not work
Okay here is the scenario: I have 6036.414 tDRK and I decide to denom and anon 10 tDRK.
This as broken down into 1035 separate denominations
Anybody know the kb limit for a single transaction?
If I'm will to pay the transaction fee, why does it matter how "large" a transaction is?
This seems to be a huge limitation of the Cli

The denom worked fine. In the end I had 14.00000014 in anon

edit3: 536.41400000tDRK failed to send

edit4: 136.41400000 failed to send - this is just getting ridiculous

edit5: 36.41400000 failed to send - something is just really wrong here

edit6: 6.41400000 failed - I give up...........

edit7: 0.41400000 FAILED - REALLY????

MxYjKxA.png

http://imgur.com/MxYjKxA.png


try sending something with option ''use non-anonymous funds'' instead of ''No Preference'' (as you have so little anonymized right now) and see if that makes a difference....
try disable darksend before sending something and see if that makes a difference....
 
Cool... it works for you!!!!! But I'm still at 62% completion and only 40 drk anonymized. The other person has stopped his wallet due to some weirdness that happened to his wallet. I'm wondering why I've got only 40 drk (only 4 denominations at 10 drk each, and other amounts are still at 2 rounds). Not sure why now the wallet seems to be stalling.

Done, ended with 267. I am going to set it to 4 rounds at 50 again after sending the whole balance to a new address.
 
Has the 5000 DRK limit been reinstated?

a1tQAEZ.png


http://imgur.com/a1tQAEZ.png

edit: also would not work @ 3036 tDRK

edit2: 1036 tDRK did not work
Okay here is the scenario: I have 6036.414 tDRK and I decide to denom and anon 10 tDRK.
This as broken down into 1035 separate denominations
Anybody know the kb limit for a single transaction?
If I'm will to pay the transaction fee, why does it matter how "large" a transaction is?
This seems to be a huge limitation of the Cli

The denom worked fine. In the end I had 14.00000014 in anon

edit3: 536.41400000tDRK failed to send

edit4: 136.41400000 failed to send - this is just getting ridiculous

edit5: 36.41400000 failed to send - something is just really wrong here

edit6: 6.41400000 failed - I give up...........

edit7: 0.41400000 FAILED - REALLY????

MxYjKxA.png

http://imgur.com/MxYjKxA.png
The issue isn't the amount of DRK, it's the transaction size - in red because it's too large, top left. Should be under 5000 Bytes. Normal way around this is to send smaller amounts in-wallet to a consolidation address( just pick one, or make a new address, and disable DS+,) then send the total amount out.

But yeah, 15000 bytes for a 0.41DRK send doesn't look right...
 
Done, ended with 267. I am going to set it to 4 rounds at 50 again after sending the whole balance to a new address.

Worked for me too but it took a few hours. Total balance was 1215 coins and I set 25 for 4 rounds. Ended up with 26 coin anonymized.

I think the issue is just with finding pairs. If nobody is working with small amounts then you have to wait. Maybe the code can be improved, but I don't think there is a bug per say.
 
Done, ended with 267. I am going to set it to 4 rounds at 50 again after sending the whole balance to a new address.
Good morning. I just woke up. I just set my wallet to the same setting, so far it's at 50% completion, but no splitting into 10 drk amounts. Has your wallet got 50 coins anonymized yet?
 
Status
Not open for further replies.
Back
Top