PinIdea ASIC X11 Miner DR-1 Hashrate 500MH/s @320w Weighs 4.5kg

Raidbak

New Member
Mar 25, 2016
19
4
3
It is delayed because of heatsinks replacement. If you have already sent an email to [email protected], you will know when it is ready to order. But at this point of time, we have not accepted any payment from anyone yet. So if anyone claimed that they have bought one of the units, that person is probably lying. Just a quick heads-up, the final product video is uploaded. We'll upload another video of the miners soon in the next couple of days. Currently, we are testing in a few mining pools to check out the performance.
Link up with nice hash to get extraneous subscribe working with your miner they are very helpful

And thanks for the update
 
Last edited by a moderator:

andhum

Member
Mar 10, 2016
44
30
58
It is delayed because of heatsinks replacement. If you have already sent an email to [email protected], you will know when it is ready to order. But at this point of time, we have not accepted any payment from anyone yet. So if anyone claimed that they have bought one of the units, that person is probably lying. Just a quick heads-up, the final product video is uploaded. We'll upload another video of the miners soon in the next couple of days. Currently, we are testing in a few mining pools to check out the performance.
That's it. This is another confirmations but some lazy guys was keeping guessing and make story without spending a few minutes time to read this tread properly from page number 1!
I hate that...
Waiting for this email...
 

andhum

Member
Mar 10, 2016
44
30
58
It is delayed because of heatsinks replacement. If you have already sent an email to [email protected], you will know when it is ready to order. But at this point of time, we have not accepted any payment from anyone yet. So if anyone claimed that they have bought one of the units, that person is probably lying. Just a quick heads-up, the final product video is uploaded. We'll upload another video of the miners soon in the next couple of days. Currently, we are testing in a few mining pools to check out the performance.
That's all??? Full 6 seconds poor quality clip??? It looks like joke :
 
  • Like
Reactions: Raidbak

miner-48er

New Member
Feb 24, 2016
16
5
3
soleo
I'll keep asking these questions:

What is the die size of your chip?
Can you post a picture of the chip?
Which foundry was it produced at?
How many ASIC chips are in the 500Mh miner?
How many chips have you produced?
 

soleo

Member
Mar 5, 2015
51
65
58
What are the noise levels like ? Can I keep them in my living room?
Soleo will be support for NiceHash and low dif. pools ? What is noise level ?
After heat sinks replacement, it would be less noisy than before. I don't know how loud it would be currently because I don't have the machine shipped to my place yet. But according to what I heard, it would be suitable for home miners.

Soleo some question's about cooling ,,,,,
1/ how does your machine display temperature ?
3/ is there a temp alarm users can set ?
More details would be revealed afterwards, but there is NO temperature display on the machine. The machine itself looks very neat. Besides two ports on the back of the machine and fan holes on the other side of the machine, there is no other stuff visible to users.

It might be possible to see the temp on the software side, but I cannot say it for sure. I'll know more after the machine is delivered to me.
 
Last edited by a moderator:

sonarous

Member
Feb 23, 2016
42
28
58
We really need an actual video clip. I understand you guys are a small group, but if you can take the time to make a short video like that, please take the time to make one demonstrating the miner is real.

We do appreciate your efforts and I know you have many people willing to invest in this if it does turn out to be real
 
  • Like
Reactions: daveolake

stakem

New Member
Feb 25, 2016
16
3
3
How are things moving, are we looking into another delay or the issues with cooling have been resolved already?
 

soleo

Member
Mar 5, 2015
51
65
58
How are things moving, are we looking into another delay or the issues with cooling have been resolved already?
The issue is resolved and I tested the new heatsinks already. The manufacture is just waiting for all the new heat sinks to be delivered to their factory and install the machines at this point.

so any chance we will get email tomorrow for purchase of miner.
Yup, it would be tomorrow or this weekend.
 

DarkWater

Well-known Member
Foundation Member
May 14, 2014
111
98
193
5280, Colorado
www.meetup.com
This is what I received...

I'm happy to tell you that we are starting to taking orders for ASIC X11 Miners.

Here is how the process looks like:

1) If you replied to this email, I'll send you an invoice from coinpayment.net.
2) Once payment confirmed, I'll send your shipping info to the manufacturer
3) You'll get a tracking code for tracking the package after the manufacturer shipped the package. Our default shipping method is http://www.sf-express.com/us/en/, you would be able to track on this website.
4) Once you received the package, feel free to contact me if you have any issue using the miner.


Happy Mining!

- PinIdea
 
  • Like
Reactions: Raidbak

soleo

Member
Mar 5, 2015
51
65
58
soleo

Why miner has on back 2x 8pin ATX power ( Need I 2x PSU ) ?
And Ethernet and USB together ? Is raspberry pi inside ?
Just one PSU is good enough. The Ethernet port is currently not used, it is reserved for a future module. No Raspberry Pi, you need to connect your Pi with USB
 

BlaCKBloOD

New Member
Mar 20, 2016
12
1
3
soleo

Is miner stable 24h/7days ? Can you post another mining video ? What is price in Dash and in BTC ? Will be another batch or will be another better miner from you ?
 

andhum

Member
Mar 10, 2016
44
30
58
Just one PSU is good enough. The Ethernet port is currently not used, it is reserved for a future module. No Raspberry Pi, you need to connect your Pi with USB
This miner probably will pull only 320W but if there will not be Pi on board pinidea will provide sd image for ours Raspberry Pi?
So also must have PSU and the Pi + software in order to start run that miner.
There will be any support available, download section, manual etc?
 

micotakis

New Member
Apr 17, 2016
1
0
1
This means that in addition cost for us who already made order, need to buy something else for put in work miner. That is not mentioned in the specification: (Power Supply: ATX12V required). Is this correct?
 

OLEGGULARIYA

New Member
Apr 11, 2016
15
0
1
Всем привет !!! А как и где это устройство можно купить !?
大家好!但是如何以及在何處本機可買?

Hello !!! But how and where this unit can be bought ?