• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

Hashing Speeds

CPU MINING
Processor: Intel® Core™ i7 CPU X 990 @ 3.47GHz × 12
Mining Software: darkcoin-cpuminer-1.2c (though NEWS says 2.3.2-x) (Ubuntu 13.10)
Hash Speed: 69 khash/s/thread

I usually run --threads=6 if I'm going to be at the computer and --threads=10 when I'm away.
 
GPU MINING
Graphics card
: ATI Radeon R7950 TF3 * 3

Mining Software: sgminer 4.1

Hash Speed: 5.45 Mh
 
Did you try to put a "pause" argument at the end of the bat file? Maybe an error message will be displayed
Thanks for the tip. It would just display the location of the miner.

I was informed that AVX wouldn't work unless Service Pack 1 was installed, so I upgraded to SP1 and AVX is now supported!
 
GPU MINING
Graphics card: ATI Radeon HD 7850
2 x XFX 7850
1 x Sapphire

Mining Software: SPH-SGMINER

Hash Speed:
2 XFX 1.858 Mh/s
1 Sapphire 1.027 Mh/s
Total ~ 2.8 Mh/s
 
GPU MINING
Graphics card
: MSI R9 270X HAWK 2G (1245 MHz core, 1500 MHz memory, no voltage increased) fan 50% with temps of 45-48 Celsius, cool room

Mining Software: sgminer 4.1

Hash Speed: 1.48 Mh/s
 
GPU MINING
Graphics card
: Gigabyte R9 280x

Mining Software: sgminer 4.1

Hash Speed:
upload_2014-4-20_12-49-48.png


Settings: (still tweaking for performance)
Code:
"auto-fan": true,
    "gpu-fan": "40-100",
    "temp-cutoff": "90",
    "temp-overheat": "85",
    "temp-target": "75",
    "xintensity": "100",
    "thread-concurrency": "8193",
    "worksize" : "256",
    "lookup-gap" : "1",
    "expiry" : "1",
    "gpu-threads" : "1",
    "vectors" : "1",
    "shaders" : "2048",
    "gpu-dyninterval" : "7",
    "api-port": "4028",
    "api-listen": true,
    "api-allow": "W:127.0.0.1",
    "failover-only" : true,
    "no-pool-disable": true,
    "no-submit-stale" : true,
    "queue": "0",
    "scan-time" : "1",
    "kernel" : "darkcoin",
    "kernel-path": "/usr/local/bin"
 
GPU MINING
Graphics card
: Gigabyte R9 280x

Mining Software: sgminer 4.1

Hash Speed:
View attachment 68

Settings: (still tweaking for performance)
Code:
"auto-fan": true,
    "gpu-fan": "40-100",
    "temp-cutoff": "90",
    "temp-overheat": "85",
    "temp-target": "75",
    "xintensity": "100",
    "thread-concurrency": "8193",
    "worksize" : "256",
    "lookup-gap" : "1",
    "expiry" : "1",
    "gpu-threads" : "1",
    "vectors" : "1",
    "shaders" : "2048",
    "gpu-dyninterval" : "7",
    "api-port": "4028",
    "api-listen": true,
    "api-allow": "W:127.0.0.1",
    "failover-only" : true,
    "no-pool-disable": true,
    "no-submit-stale" : true,
    "queue": "0",
    "scan-time" : "1",
    "kernel" : "darkcoin",
    "kernel-path": "/usr/local/bin"
Nice hash speeds! I'm currently thinking of adding a 280x under my 270x, is it possible to run into some isses? gpu-threads:2, on my 270x at the moment. Couldn't find any usable info about pairing 270x and 280x.
 
GPU Mining
Graphics card:
Sapphire 280-X Vapor-X
Mining Software: sgminer 4.1
Hash Speed:
DRK_280xh.png

This is obviously pointing to p2p. Can get 11.2MH/s 0% pointing to MPOS but with entirely different settings.
Settings:

Code:
-k darkcoin -o stratum+tcp://drk.altmine.net:7903 -u Xt3Adarkrocks!1LbZKnCLDKMG3nukuziH3aaha.!. -p x --auto-fan --gpu-fan 40-85 --temp-cutoff 92 --temp-overheat 88 --temp-target 64 -I 18 -g 1 -w 128 --lookup-gap 2 --thread-concurrency 8192 --gpu-powertune 20 --gpu-engine 1100 --gpu-memclock 1500
 
Last edited by a moderator:
Processor: Intel i5 3470 (stock)
Hashes: ~300KH/s using 4 cores
Software: CPUMiner 1.3 / minerd-avx-aes-sse2-sss3 file
 
GPU MINING
Graphics card
: MSI R9 270X HAWK 2G (1245 MHz core, 1500 MHz memory, no voltage increased) fan 50% with temps of 45-48 Celsius, cool room

Mining Software: sgminer 4.1

Hash Speed: 1.48 Mh/s
Hey Nmilanov, could you please elaborate on your settings? I have the exact same card and I can't get it over 1350ish average, what tc worksize are you using, are you using multiple threads? I can up it to 1.4 peaks briefly but any pool disconnect will knock my average down back to 13xx speeds, thank you for any help you can provide.
Cheers.
 
Hey Nmilanov, could you please elaborate on your settings? I have the exact same card and I can't get it over 1350ish average, what tc worksize are you using, are you using multiple threads? I can up it to 1.4 peaks briefly but any pool disconnect will knock my average down back to 13xx speeds, thank you for any help you can provide.
Cheers.
Hey darkhawk, here's the setting I am using - "-g 2 -w 256 --intensity 18 --lookup-gap 2 --thread-concurrency 10481". The overclocking is done with MSI Afterburner 3.0 Beta 19. Hope I'd helped :)
 
7 x Sapphire R9 270 BOOST&OC mining with sph-sgminer.
pSIQPLv.png

u4uUfi1.png

Code:
"api-port": "4028",
"api-listen": true,
"api-allow": "W:127.0.0.1",
"failover-only" : true,
"no-pool-disable": true,
"no-submit-stale" : true,
"kernel-path": "/usr/local/bin",
"kernel": "darkcoin",
"xintensity" : "400",
"vectors" : "1",
"worksize" : "128",
"auto-fan" : true,
"temp-cutoff" : "79",
"temp-overheat" : "69",
"temp-target" : "59",
"expiry" : "30",
"gpu-dyninterval" : "7",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "30",
"temp-hysteresis" : "3",
"shares" : "0",
"shaders" : "1280",
"thread-concurrency" : "16320",
"gpu-thread" : "1",
"gpu-engine" : "1149",
"lookup-gap" : "2",
"gpu-powertune" : "20",
"gpu-memclock" : "1500"
 
Back
Top