• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

v0.10.15 - Onyx Release

The enforcement period is too long. Plain and simple. No reason to be longer than a week of waiting for people to update, most are done same day or within a few days. Anything longer encourages leeching. Miners shouldn't be mining with pools that don't give two shits about being on the latest wallet.
You were in the channel when Evan said he's waiting until some block# then he's going to switch the enforcement on, right? he said it would be about ~3 days. So it's coming, right?
 
You were in the channel when Evan said he's waiting until some block# then he's going to switch the enforcement on, right? he said he would be about ~3 days. So it's coming, right?

I brought that up from an email with Evan about block 158k because that's when masternode payouts bump from 20 to 25%. He is looking to see how many pools have updated their stratum code for the dynamic payout. He still wants to see 85% which I'm not sure will be possible with the one solo miner (90 is for sure out).
 
You were in the channel when Evan said he's waiting until some block# then he's going to switch the enforcement on, right? he said it would be about ~3 days. So it's coming, right?

src/main.cpp: if(nHeight > 158000) ret += blockValue / 20; //25.0% - 2014-10-23

block 158001 is the shift. Assuming 2.5 minute blocks thats 46.6 hours from now. w00t!
 
src/main.cpp: if(nHeight > 158000) ret += blockValue / 20; //25.0% - 2014-10-23

block 158001 is the shift. Assuming 2.5 minute blocks thats 46.6 hours from now. w00t!

That would be great if my Masternodes would stay active long enough (which they don't) to get some votes [hint, hint].
 
Yep, from day one. Didn't change anything, every 74 minutes (average) they go inactive until I give them a loving kick in the nuts :rolleyes:

Where are you seeing them as :0?

15.14 is consistent for me so far across all my nodes and local wallet, poolhash.org still on 15.13, don't go by that.
 
Myself and moocowmoo have had issues of some masternodes not seeing some others in the network. Also not always getting the HotCold mention upon starting a masternode since 15.14. Some of moo's nodes won't see some of my nodes unless he restarts his.

We also don't see the same masternode count on every nodes.
My results:
664 , 641 , 640 , 641 , 642 , 652
 
Last edited by a moderator:
Where are you seeing them as :0?

15.14 is consistent for me so far across all my nodes and local wallet, poolhash.org still on 15.13, don't go by that.

I have darkcoinds (for logging) running with the same version as the Masternodes, right now I'm speaking of v.0.15.14.

My local darkcoinds and those running on my VPS' report the same (with minimal time delays of course).
 
This thread has derailed into many different topics. Now it is even becoming uncivil.
Thread is locked. I'll be moving multiple posts to separate threads with their respective links and reopen this one after it is completed.

Mining Pool dynamics discussion has been moved here.
https://darkcointalk.org/threads/onyx-release-mining-pools.2726/

This thread is for the new software release. Any problems you find or questions should be posted here. This is not the thread for proposing new distribution models or changes to the protocol.

Thread has been reopened. Once again, keep it civil.
 
Last edited:
In other words, you got 2 payments to an address which once WAS a Masternode.

Interesting....I'll open another JIRA issue for that...

Edit: Done, see http://jira.darkcoin.qa/browse/DRK-107

OK, back on track.

This address: XonoU99cPNkWkc3UuEvVN4btUrgWeCCcEc was never operating as a masternode. It "earned" 2 MN payments: 4668c8064f29035a943a0864a895ae2ed8f7ed72f256a2ae252809a9b8ad4a3a
and: 0b26601ccc7275ca994aa0dd703ec1c3f150dd0cfed9a744dd82b3e9a62706e9

Any ideas?
 
v0.10.15.15 - Onyx Masternode Stability Update (RE: Crowning/Jimbit)

There have been some masternode stability problems (masternodes not staying active on the network) for some users, this was caused by the masternode operators changing the masternodeprivkey and then starting the masternode again. This lead to some of the networking have one pinging key and parts of the network having another. This update fixes that issue and will allow masternodes to change that key. Because of this issue clients were flagging peers as misbehaving, eventually leading to them being banned, causing network fragmentation, which lead to other issues on the network.

An alternative solution is to move the 1000DRK input to a brand new address that the network has not seen. Then start the masternode normally. Once the network updates to v15.15, we won't have these issues anymore.

Enforcement:

At block 158,000 masternode rewards will jump to 25%, if more than 80% of the network is updating and paying the correct rewards enforcement will be activated then. From the looks of it, we're very close to those numbers already. Once enforcement is active, payments will be completely 100% fair and equal between all masternodes.

10.15.15 Onyx Binaries: All Users

Source: https://github.com/darkcoin/darkcoin
Windows .exe: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-win.zip
Mac OSX: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-osx.dmg
Linux: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-linux.tar.gz
 
Last edited by a moderator:
all my MN updated... looking good so far!

thank you Evan

edit: after about an hour... this is the best I have seen my MN's since the latest launch.. :)
 
Last edited by a moderator:
v0.10.15.15 - Onyx Masternode Stability Update (RE: Crowning/Jimbit)

There have been some masternode stability problems (masternodes not staying active on the network) for some users, this was caused by the masternode operators changing the masternodeprivkey and then starting the masternode again. This lead to some of the networking have one pinging key and parts of the network having another. This update fixes that issue and will allow masternodes to change that key. Because of this issue clients were flagging peers as misbehaving, eventually leading to them being banned, causing network fragmentation, which lead to other issues on the network.

An alternative solution is to move the 1000DRK input to a brand new address that the network has not seen. Then start the masternode normally. Once the network updates to v15.15, we won't have these issues anymore.

Enforcement:

At block 158,000 masternode rewards will jump to 25%, if more than 80% of the network is updating and paying the correct rewards enforcement will be activated then. From the looks of it, we're very close to those numbers already. Once enforcement is active, payments will be completely 100% fair and equal between all masternodes.

10.15.15 Onyx Binaries: All Users

Source: https://github.com/darkcoin/darkcoin
Windows .exe: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-win.zip
Mac OSX: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-osx.dmg
Linux: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.15-linux.tar.gz

Linux link doesn't work.

darkcoin.io has v 15.16

What is the diff with 15.15?

We should have a thread ONLY for version announcements.
 
v0.10.15.16 - Onyx Masternode Stability Update

After some more inspection I found there were multiple Masternode announcement messages propagating around the network. This update filters out all but the newest one to ensure the list is correct and up-to-date. It's not manditory to update, but please do if you can. Last update till InstantX
smiley.gif


10.16.16 Onyx Binaries: All Users

Source: https://github.com/darkcoin/darkcoin
Windows .exe: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-win.zip
Mac OSX: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-osx.dmg
Linux: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-linux.tar.gz
 
v0.10.15.16 - Onyx Masternode Stability Update

After some more inspection I found there were multiple Masternode announcement messages propagating around the network. This update filters out all but the newest one to ensure the list is correct and up-to-date. It's not manditory to update, but please do if you can. Last update till InstantX
smiley.gif


10.16.16 Onyx Binaries: All Users

Source: https://github.com/darkcoin/darkcoin
Windows .exe: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-win.zip
Mac OSX: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-osx.dmg
Linux: https://github.com/darkcoinproject/darkcoin-binaries/raw/master/darkcoin-0.10.15.16-linux.tar.gz

10.16.16 should be 15.16
 
Back
Top