• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

masternode help or trouble shooting guide

ok, now I tried dashninja again and it found my master node´s IP
does it mean, it works now correctly, even if the terminal gives me after /dash-cli masternode list full | grep <my MN IP address.> is the answer:"couldn't connect to server
Status in dashninja:
Status Active (100%)
Port Check Status Closed (Connection refused)
Port Check Next Try 38 minutes 19 seconds
Daemon Version Unknown (Protocol=70103)
Balance 1,000.000 DASH
Last Paid (from dashd) Never/Unknown
Last Paid (from blocks) Never/Unknown
Total Paid (Last month) 0.000 DASH (0 times / 0 missed / 0 hijacked)
Active Duration
Last Seen
10.1.2017, 17:00:27 (25 minutes 57 seconds ago)
Country
us.png
United States
(Last refresh: Tue Jan 10 2017 17:26:23)

is it good and working? It Feels good ;-)
 
Hmmm looks like you have ports problem.
PMed you.
 
enlarge your window first to see all in lines ;)
and check for .dashd process if it`s there....
 
as i supposed :)
so start it again
Code:
./dashd
check if you see it now....
Code:
ps aux
after this check this dashninja.pl again after 30 min to see if you have all green. If yes do the autorestart script on your remote server.
 
sorry, I was away on job.
But I followed your instructions and received an "enabled" and can find it on dash ninja.
I have two reds: last paids, but this sounds normal reg my MN is new, right?
Status Active (100%)
Port Check Status Open
Port Check Next Try 48 minutes 5 seconds
Daemon Version 0.12.0.58 (Protocol=70103)
Balance 1,000.000 DASH
Last Paid (from dashd) Never/Unknown
Last Paid (from blocks) Never/Unknown
Total Paid (Last month) 0.000 DASH (0 times / 0 missed / 0 hijacked)
Active Duration 13 minutes 41 seconds

Anything else I should do or watch out for?
Anyways, thanks a lot for your support. For me this is very new and challenging...
 
sorry, I was away on job.
But I followed your instructions and received an "enabled" and can find it on dash ninja.
I have two reds: last paids, but this sounds normal reg my MN is new, right?
Status Active (100%)
Port Check Status Open
Port Check Next Try 48 minutes 5 seconds
Daemon Version 0.12.0.58 (Protocol=70103)
Balance 1,000.000 DASH
Last Paid (from dashd) Never/Unknown
Last Paid (from blocks) Never/Unknown
Total Paid (Last month) 0.000 DASH (0 times / 0 missed / 0 hijacked)
Active Duration 13 minutes 41 seconds

Anything else I should do or watch out for?
Anyways, thanks a lot for your support. For me this is very new and challenging...
You are fine now :) congratulations :)
You might install @moocowmoo's dashman tool on your server so when the new version comes out you could easly update your client with one command (hoping moo will find the time to prepare it. Very busy lately)
 
Last edited:
You are fine now :) congratulations :)
You might install @moocowmoo's dashman tool on your server so when the new version comes out you could easly update your client with one command (hoping moo will find the time to prepare it. Very busy lately)
Hi,
thought I was fine. But I couldn't find my masternode in dashninja. So I startet your routine again (dashd, dash-cli masternode list full | grep "my IP" -> enabled.
Now I can find my MN in dashninja. Do you know, why it went down?
 
I have no idea but there might be many things, what kind on hardware specifications you have on your server?
 
Back
Top