• Forum has been upgraded, all links, images, etc are as they were. Please see Official Announcements for more information

v0.10.17 - Onyx v3

p2pool fail
Code:
2014-12-26 23:27:42 Masternode payment to XkN1qML7m5V8w8PGsaAcCwW9E1QmfQfzY1
2014-12-26 23:27:42 CreateNewBlock(): total size 1417
2014-12-26 23:27:42 CheckBlock() : Couldn't find masternode payment(1|175000000) or payee(1|1Wh4bh) nHeight 192813.
2014-12-26 23:27:42 ERROR: CheckBlock() : Couldn't find masternode payment or payee
2014-12-26 23:27:42 dseep - Asking source node for missing entry CTxIn(COutPoint(a29ee59096367a843194c888c61c934379fcf7ddd8850db536561c2880b1a1fb, 1), scriptSig=)
2014-12-26 23:27:42 dseep - Asking source node for missing entry CTxIn(COutPoint(a055eef25e114f49a3bf2729e181a6a88904285b8cf8ab5b688bde62a8107f6e, 1), scriptSig=)
2014-12-26 23:27:45 Masternode payment to XkN1qML7m5V8w8PGsaAcCwW9E1QmfQfzY1
2014-12-26 23:27:45 CreateNewBlock(): total size 1417
2014-12-26 23:27:45 CheckBlock() : Couldn't find masternode payment(1|175000000) or payee(1|1Wh4bh) nHeight 192813.
2014-12-26 23:27:45 ERROR: CheckBlock() : Couldn't find masternode payment or payee
2014-12-26 23:27:46 dseep - Asking source node for missing entry CTxIn(COutPoint(cd2a09c27b2974d9954412b96c4fd18ce1641c97d8da97a4591ddcd11e073514, 0), scriptSig=)
2014-12-26 23:27:46 dseep - Asking source node for missing entry CTxIn(COutPoint(f51e02ffa8367bd64d03d63471c3ff183bb6778ce198ef5d09983e257d8c6715, 1), scriptSig=)
2014-12-26 23:27:46 dseep - Asking source node for missing entry CTxIn(COutPoint(4c183649bcf95fe3d6754dd270fe49fee78c44d63a81db910c6ea4c75b924093, 0), scriptSig=)
2014-12-26 23:27:47 dseep - Asking source node for missing entry CTxIn(COutPoint(ff9d28f1bef66c6d2d54bc7b3b33c4b5e75b0d7abc225508db7fd4a52bd9bccf, 1), scriptSig=)
2014-12-26 23:27:47 dseep - Asking source node for missing entry CTxIn(COutPoint(06a829372d6fc171899563bc3820447d0d214eafc92e35703b9114121ce8abc8, 0), scriptSig=)
2014-12-26 23:27:47 dseep - Asking source node for missing entry CTxIn(COutPoint(762e62a4148da57275d905845ccad4fcc0c2fa0b6954679f11ea36c1cad1b3a4, 1), scriptSig=)
2014-12-26 23:27:48 Masternode payment to XkN1qML7m5V8w8PGsaAcCwW9E1QmfQfzY1
2014-12-26 23:27:48 CreateNewBlock(): total size 1417
2014-12-26 23:27:48 CheckBlock() : Couldn't find masternode payment(1|175000000) or payee(1|1Wh4bh) nHeight 192813.
2014-12-26 23:27:48 ERROR: CheckBlock() : Couldn't find masternode payment or payee
2014-12-26 23:27:49 dseep - Asking source node for missing entry CTxIn(COutPoint(bfbec1b00dfcb825082105501d4d0d698c0f6c1498ab7656cd4eeeee9379d720, 0), scriptSig=)
2014-12-26 23:27:50 dseep - Asking source node for missing entry CTxIn(COutPoint(93a920edb15496cc43bc8e2b1b084cb8c3713e20cd3e593fa4b4d7e8dc224617, 0), scriptSig=)
2014-12-26 23:27:50 dseep - Asking source node for missing entry CTxIn(COutPoint(c3ce42a3daee1182189e8610d7a38eaae7480cc40e2864259546a4c5203fc8d4, 1), scriptSig=)
2014-12-26 23:27:51 Masternode payment to XkN1qML7m5V8w8PGsaAcCwW9E1QmfQfzY1
2014-12-26 23:27:51 CreateNewBlock(): total size 1417
2014-12-26 23:27:51 CheckBlock() : Couldn't find masternode payment(1|175000000) or payee(1|1Wh4bh) nHeight 192813.
2014-12-26 23:27:51 ERROR: CheckBlock() : Couldn't find masternode payment or payee

What version are you on and what protocol when you getinfo?
 
I haven't received a masternode payment for almost 2 weeks now (since I updated to 10.17.24). I have stopped and restarted the remote node, i have already moved the 1000 DRK with a transaction so a different tx in gets selected, and can't find any errors in the debug log.

drk.mn shows it as 100% active and open

does anyone have any idea what to try next, or why this is happening?
 
Try to check carefully all your configs (both darkcoin.conf) and especially externalip entry on vps. You may change ip, masternode addr and masternodeprivkey also.

I changed my ip address as well, 4d 17h still no payment. Everything was working fine before the version change. Weird thing is, after the ip change, drk.mn is showing both my ip addresses with one still partially listed (25%) and the other at 100%.

Is there an updated manual for a hot-cold mn setup, I can check my settings with?
 
I changed my ip address as well, 4d 17h still no payment. Everything was working fine before the version change. Weird thing is, after the ip change, drk.mn is showing both my ip addresses with one still partially listed (25%) and the other at 100%.

Is there an updated manual for a hot-cold mn setup, I can check my settings with?

finally received a payout today, after getting a new vpn ip for my local wallet, moving the transaction, regenerating the private key and installing the remote on a new vps with a new ip. Still don't have any idea why my previous setup wasn't working. Most likely inadvertently misbehaving and the ip being banned of the remote
 

Either something is wrong with my internet or the Mac version link does not work.

p.s. I tried the link for windows and download started right away but when i click the link for Mac version, download does not start.
 
darkcoin@webserver:~$ ls -alh darkcoind
lrwxrwxrwx 1 darkcoin darkcoin 42 Jan 10 12:40 darkcoind -> darkcoin-0.10.17.26-linux/bin/64/darkcoind
darkcoin@webserver:~$ ./darkcoind -datadir=data getinfo | grep version
"version" : 101725,
"protocolversion" : 70051,
"walletversion" : 60000,
 
Reports


Reports "version" : 101725,
same win32 version

p, li { white-space: pre-wrap; }



{
"version" : 101725,
"protocolversion" : 70051,
"walletversion" : 60001,
"balance" : 0.00000000,
"darksend_balance" : 0.00000000,
"blocks" : 200733,
"timeoffset" : 0,
"connections" : 4,
"proxy" : "",
"difficulty" : 2249.95194056,
"testnet" : false,
"keypoololdest" : 1420894478,
"keypoolsize" : 1001,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}
 


HEADS UP!

This release changes the public address of your multisignature holdings! The private keys and redeemscripts are untouched and you can still access your funds without any problems. You just might wish to regenerate the script to update the public key to recieve funds! Multisignature addresses start with '7' now. (Example.)

CC: fernando
 
Mac link is working now.

Yes, Mac link works and I installed it without any problem BUT when attempted to create a new wallet address, this pop up:

m1iv7Y5.png


How do I "regenerate the script [in Mac] to update the public key to recieve funds" as was warned by vertoe ? Also what is going to be the implication of this change to the exchanges?
 
Yes, Mac link works and I installed it without any problem BUT when attempted to create a new wallet address, this pop up:

m1iv7Y5.png


How do I "regenerate the script [in Mac] to update the public key to recieve funds" as was warned by vertoe ? Also what is going to the implication of this change to the exchanges?
lol this is a serious bug, thanks for highlighting. not much you can do about, wait for .27 :)
 
Back
Top