v0.10.15.x Testing
- Thread starter eduffield
- Start date
- Status
qwizzie
Well-known member
Ran 5 Darkcoin clients simultaniously with Amount and Rounds set to 685 / 8
Within 1 hour 4 of those Darkcoin clients reached 100% and 1 Darkcoin client still on 75%
The 4 Darkcoin clients that reached 100% each charged exactly 8 Darksend Denominate fees of 0.0125
It all went very smoothly and fast in this latest update....
qwizzie
Within 1 hour 4 of those Darkcoin clients reached 100% and 1 Darkcoin client still on 75%
The 4 Darkcoin clients that reached 100% each charged exactly 8 Darksend Denominate fees of 0.0125
It all went very smoothly and fast in this latest update....
qwizzie
My 3 DRK / 2 Rounds is still stuck at 33%. Sync says: "0 hours behind", and I am so far charged one 0.0125 and one 0.001 tDRKs
Edit: Now wallet sync is back to "2 hours behind" again and all the funds are "Unconfirmed" and Darksend is idle.
Edit: it jumps back "5 hourse behind" very briefly and then back to "2 hours behind"
Edit: Now wallet sync is back to "2 hours behind" again and all the funds are "Unconfirmed" and Darksend is idle.
Edit: it jumps back "5 hourse behind" very briefly and then back to "2 hours behind"
Last edited by a moderator:
Yup, I'm waiting for either of the faucets to pay out...
flare
Well-known member
How many coins do you need?
If somebody could send 200 to mxomigzggXJYqQfVUnV7mYPZUmmU3AFBHj I'd be appreciative.
Am I correct in thinking that all testnet addresses should begin with an m?
Because the first address in this fresh QT install is
n3q9i5p93U9tuC7AC6CH8UxZ6qjyyARgPV
I saw something odd too. Might have been forks at some point since there was no mining going on for a while.
flare
Well-known member
I am not aware of any, all masternodes are on the same height.
If I am the only person mining I did power down for a while to squeeze an extra 0.5 out of my GPU....
Tesquenure
Member
Thx flare, i use "setgenerate true 1" for one CPU. just wait and see how long it's take to mine one block (1 hour, 1 day or 1 week ?)Just put "setgenerate true" in your debug console, it will use the built in miner
flare
Well-known member
sent 5000 - due to base58 encoding testnet addresses either start with n or m
Thanks for the 5000tdrk whoever that was 
My heart still flutters when I see 5000 DRK pop up...
My heart still flutters when I see 5000 DRK pop up...
flare
Well-known member
Depends on hashrate - stonehedge is mining with 2MH/s if your cpu is doing 200kH/s you will get 10% of all blocks, so one block each 25mins
Sorry guys you've got competition, my mighty laptop is stretching one of its cores. :tongue:
http://tdrk.poolhash.org/ is howing unpaid blocks again though...
http://tdrk.poolhash.org/ is howing unpaid blocks again though...
Tesquenure
Member
10 khash/s, not sure im realy help :grin:Depends on hashrate - stonehedge is mining with 2MH/s if your cpu is doing 200kH/s you will get 10% of all blocks, so one block each 25mins
Tesquenure
Member
i find my hash in debug log "hashmeter", do they have commande line in debug console to see my "big" hash power ?
getminininginfo
Just out of interest, if I pointed 500Mh/s at testnet and I mined every block...what would happen? Would I just ruin it for everybody?
- Status