Welcome to the Dash Forum!

Please sign up to discuss the most innovative cryptocurrency!

Miner controller HELP

Discussion in 'Questions and Help' started by BlockBoy_B, Jul 25, 2018.

  1. BlockBoy_B

    BlockBoy_B New Member

    Joined:
    Jul 24, 2018
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Greetings to all,

    My Pinidea DR 100 PRO has a faulty control board. Miner powers up but web interface cannot be accessed. Is it possible to use a raspberry pi as a controller for the miner? Any suggestions greatly appreciated!
     
  2. pwjjrn

    pwjjrn New Member

    Joined:
    Jul 10, 2017
    Messages:
    33
    Likes Received:
    8
    Trophy Points:
    8
    Make sure you got the right IP address of the miner.
     
  3. BlockBoy_B

    BlockBoy_B New Member

    Joined:
    Jul 24, 2018
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    Yes, I used 192.168.1.200 as ip. "This site can't be reached" is displayed on screen.
     
  4. pwjjrn

    pwjjrn New Member

    Joined:
    Jul 10, 2017
    Messages:
    33
    Likes Received:
    8
    Trophy Points:
    8
    to make sure the miner is alive, try execute "ping 192.168.1.200" command.
    Maybe you can find the real ip from the DHCP stats in router.