Search results

It's 0.052 dash which is consistent with a hash rate of 11.8 GHS and a difficulty of 7,950,000

I'm getting an average of 11.6 GHS on CoinMine.pl without the need to specify any parameters.

For what it's worth, I'm getting over 12 GHS on CoinMine.pl

I've been mining on the Chicago pool for the last month with the 10G miner Thursday a new 22G miner started mining at around 14:00 and the payout skyrocketed from .04 to 0.18 within a couple of hours while my payout dropped off significantly at the same time. The 22G miner was mining on the...

I've been mining on the Chicago pool . Can you explain why there is such dramatic difference in the payout for the 22G and 10G miners?

All the other hashing boards tested good. What is the process for replacing the board?

Will I need to remove the blade in order to test hashing boards? Are there any tricks to removing and re-installing the blade?

I had the same issue with the miner I received, fans running, no lights or network connection. I left it running for about 30 mins and finally booted up and connected to network.

I'm getting a high 70% H/W on DM2 I'm getting a high 70% H/W on DM2, but also getting a good hash rate

I ran the single blade test and it the problem is with DM2 Col5

The miner booted up and connected after 30 minutes, but blade DM2 LED blinks red and blue and only show 0 to 5 active chips

I have a similar problem; the fans power up but no LED lights on the front panel. I have a red light on the controller and solid blue lights on the blades, and no ethernet connection. Andres