V12 Release

SirHikmat · Aug 18, 2015

fible1 said:
My nodes have also been dropping like flies. JFYI.

Pablo.

OS, RAM ? I'm very interested in settings, because I have trouble to get my docker container running in different environments...

UdjinM6 · Aug 18, 2015

Lebubar said:
Hi,

I think the new version need more resource, what I'm seen is that my MN crashed more often, (not so much but 2 out of 15 last 24h).
Maybe we'll need to have better VPS? But should be interesting to know of it's RAM that is needed (most probably), or cpu? Or Bandwidth?

Also someone on BCT complaining about the crash of his MN (and saw some message here also from Tao,...). I think we have to check this carefully as I think that some MN operators are capable to sold their MN, if they didn't have their payment with silver spoon directly in their mouth A part of this it's important to have stable daemon for MN, also for an healthy Network.

What are few lines from debug.log at the time it crashed?

UdjinM6 · Aug 18, 2015

fible1 said:
My nodes have also been dropping like flies. JFYI.

Pablo.

more info pls

Lebubar · Aug 18, 2015

Well the one that crashed has a crontab that restart it automatically (and log is already overwrited). And the other was not responding (have to kill it) and didn't save debug.log.

Since then no crash for the moment

so I promise that next crash I'll save the debug.log (just for you

.

fible1 · Aug 18, 2015

I'm actually not sure about settings but I am sure the configuration is fine since Flare is running them for me. But I have had to issue "start-many" about 5 time in the last 5 hours.

Hope that helps

.

Pablo.

Sub-Ether · Aug 18, 2015

fible1 said:
I'm actually not sure about settings but I am sure the configuration is fine since Flare is running them for me. But I have had to issue "start-many" about 5 time in the last 5 hours.
Hope that helps .
Pablo.

I keep dropping off Elbereth's list, I restart , it reappears, but says that the connection is over 1 day long so was never terminated

flare · Aug 18, 2015

fible1 said:
I'm actually not sure about settings but I am sure the configuration is fine since Flare is running them for me. But I have had to issue "start-many" about 5 time in the last 5 hours.

Hope that helps .

Pablo.

Your nodes look fine for me so far, there was only one daemon crashed this morning, i guess that's the one you noted as dropping.

MangledBlue · Aug 18, 2015

final got the Pi up and running - ugh - took a minute - learning new settings....
Adjusting Guide....

THX for everybody's assistance :-D

bertlebbert · Aug 18, 2015

moli you have suggested to me a coupla times when using dash-cli in Windows cmd console, it's helpful to have the console opened in the dash-cli directory - yes, it saves having to type whole path, eg. "C:\Program Files (x86)\dash-cli.exe".

Anyways, a quickie way to open cmd in a particular folder is "Shift key + Right-click" on desired folder (or folder shortcut):

minersday · Aug 18, 2015

There's really something happening after two days of running masternodes. I don't have the problem because I host the nodes myself and enough resources and nobody's throttling them.
CPU after two day's of .45 release:

Memory after two day's of .45 release:

From masternode top -H, command
3470 XXXX 22 2 1160620 461376 52776 R 10.9 22.5 329:24.41 dash-msghand

strace -p 3470, so what's the process is doing, spamming this:
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724245, {1439916948, 991107072}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724247, {1439916948, 992479377}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724249, {1439916948, 993825973}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724251, {1439916948, 995181868}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724253, {1439916948, 996536142}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724255, {1439916948, 997914829}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724257, {1439916948, 999268586}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724259, {1439916949, 595133}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724261, {1439916949, 1980812}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724263, {1439916949, 3334407}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724265, {1439916949, 4749414}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724267, {1439916949, 6155997}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724269, {1439916949, 7511230}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724271, {1439916949, 8798410}, ffffffff) = -1 ETIMEDOUT (Connection timed out)
futex(0x7f71e89c5b18, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0x7f71e89c5b44, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 345724273, {1439916949, 10154768}, ffffffff) = -1 ETIMEDOUT (Connection timed out)

Lukas_Jackson · Aug 18, 2015

One shut down as well. This one is on vultr actually, so spec are ok. MN on worse vps are ok atm

Code:

2015-08-18 13:34:11 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:12 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:13 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:13 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:13 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:13 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:14 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:14 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:15 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:15 dseg - Sent 1 Masternode entries to 150.254.118.211:49647
2015-08-18 13:34:16 Verifying mncache.dat format...
2015-08-18 13:34:17 CMasternodeMan::AskForMN - Asking node for missing entry, vin: CTxIn(COutPoint(d69f1bab6a2393a081dad7f39348995a6175f9abe480e71a1129729cb909e670, 0), scriptSig=)
2015-08-18 13:34:17 Loaded info from mncache.dat  437ms
2015-08-18 13:34:17   Masternodes: 2574, peers who asked us for Masternode list: 1, peers we asked for Masternode list: 0, entries in Masternode list we asked for: 120, nDsqCount: 6286
2015-08-18 13:34:17 Writting info to mncache.dat...

minersday · Aug 18, 2015

Lukas_Jackson said:
One shut down as well. This one is on vultr actually, so spec are ok. MN on worse vps are ok atm
2015-08-18 13:34:17 Writting info to mncache.dat...[/code]

Do you have mem usage graph?

qwizzie · Aug 18, 2015

Posted this already on BCT but pages there have a tendency to move by very fast so i thought i post it here as well :

My masternodes on VULTR just died too after running two days : all 768 MB, single CPU, 15 GB SSD, 1000 GB bandwidth (they rarely exceed 60 GB bandwidth)
Unfortunetely no debug.logs.. below picture pretty much the same for all masternodes.

This specific server had 56.4GB inbound and 57.3GB outbound.

To try to fix it i'm trying the following :

in dash.conf on server-side i changed / added

maxconnections=100 (was 256)
txindex=1

in dash.conf in cold wallet i just added

txindex=1

I deleted peers.dat and mncache and did a -reindex and gave masternode start passphrase from cold wallet and they are all visible and active on dashninja.pl again.

./dash-cli masternodelist full | grep -e SERVER_IP gave "ENABLED" for all masternodes again (it gave that 2 days ago too)
masternode debug gave for all remote masternode wallets the "successfully started masternode message".

I'm keeping the debug.logs on the servers this time in case something goes wrong (again)

MangledBlue · Aug 18, 2015

Explain this one please: txindex=1

qwizzie · Aug 18, 2015

MangledBlue said:
Explain this one please: txindex=1

Its from UdjinM6's checklist on Bitcointalk forum (tbh i thought it was already activated with v0.12.0.45) -->
https://bitcointalk.org/index.php?topic=421615.msg12174625#msg12174625

Checklist:
- "txindex=1" in dash.conf
- 1 run with -reindex after that ^^^
- start-many/alias from local after reindex is finished
- "masternode debug" on remote should give you "Masternode successfully started", if it's not try this https://dashtalk.org/threads/v12-release.5888/page-15#post-63716

minersday · Aug 18, 2015

qwizzie said:
Posted this already on BCT but pages there have a tendency to move by very fast so i thought i post it here as well :

I'm keeping the debug.logs on the servers this time in case something goes wrong (again)

Do you have mem usage graph?

qwizzie · Aug 18, 2015

minersday said:
Do you have mem usage graph?

no, VULTR just shows us CPU, Disk and Network graphs..

pille · Aug 18, 2015

buster said:
The thing that really matters is showing those people you are grateful for what they do. If there's a mistake in a video, point it out, but don't make me feel bad about it.

I'm really sorry that my reply offended you. Let me assure you that it was meant as a hint, not to speak bad about your work. It came out the wrong way. This may be caused also by my bad english. Please accept my apologies.

Lebubar · Aug 18, 2015

For memory usage, maybe I'll check to install nmon on 1 or 2 of my MN.
Never did it for ubuntu but I'll check.

EDIT:
Ok found it, install the binary directly, and colecting data right now.

Code:

./nmon_x86_64_ubuntu1410 -f -s 120 -c 1000

Will post result later

AjM · Aug 18, 2015

qwizzie said:
Its from UdjinM6's checklist on Bitcointalk forum (tbh i thought it was already activated with v0.12.0.45) -->
https://bitcointalk.org/index.php?topic=421615.msg12174625#msg12174625

If i remember it right, txindex=1 is default in the v12.
Maybe UdjinM6 can comment on this, is the txindex=1 mandatory in dash.conf, i thought it was only in v11?

V12 Release

Member

Official Dash Dev

Official Dash Dev

Active member

Well-known member

Well-known member

Well-known member

MangledBlue

Guest

Well-known member

Member

Active member

Member

Well-known member

MangledBlue

Guest

Well-known member

Member

Well-known member

Well-known member

Active member

Well-known member