Search results

  1. maky

    Wrapped DASH and DASH <-> ETH bridge.

    What do You think about creation of token wrappedDASH (like wBTC, wGOLD etc) on ETH. Contract and system controlled by for example masternodes? We could get handicap of DeFi and they can move from DeFi to quick and cheap payments on DASH system.
  2. maky

    Dash Economics Discussion Series

    Can we just vote to change block reward like we vote proposals? Small adjustment each cycle: up, down or no change. Like MKR do. We can vote change of fees too. I mean all automatic.
  3. maky

    Attention Dash Masternode Owners: Please register with the Deterministic Masternode List now

    MN 2991/4689 = 63,78% 24h 251/4689 = 5,35% GAME OVER = not tomorrow In my opinion 2/3 is enough even when you change a constitution. ;)
  4. maky

    Attention Dash Masternode Owners: Please register with the Deterministic Masternode List now

    OK, so if we will not run SPORK 15 on 8 march i will vote against money for DASH core. ;P
  5. maky

    Dash v12.3 Release Announcement - available July 3rd

    Great. No internet. No computer. Holidays. :))))
  6. maky

    Dash v12.3 Release Announcement - available July 3rd

    Great... Could You give me a day of July. Plus, minus...
  7. maky

    Version 12.2 release

    OK, my problem was: "Not capable masternode: Invalid protocol version" I got Trezor to start mn. I used version 0.9.13 of Dash Masternode Tool. Moving to version 0.9.11 fix the problem.
  8. maky

    Version 12.2 release

    How to "start alias" from hardware wallet?
  9. maky

    V12 Testing Thread

    Two problems: GUI: extremaly small fonts on 3200x1800 14' screen I got Lenovo Yoga with 3200x1800 resolution. Fonts in DASH Core are slightly above 1mm tall. To small for me. How about possibility to resize in options or checking resolution by program and corect font size? GUI: masternodes tab...
  10. maky

    Proposal: Hardware Wallets For Build And Test

    OK, I will be patient. Just let us know. Thank You. :)
  11. maky

    Proposal: Hardware Wallets For Build And Test

    Is this problem 'fixable'? Or it is just Ledger hardware problem? Or Ledger software?
  12. maky

    How to setup multiple Masternodes from One Wallet ?

    And "masternodeprivkey" it is just random number generated by command: masternode genkey (try generate couple of times) It is not in any way connected to masternode address priv key. Just must be the same on local and remote. It is something like password and login in rpc.
  13. maky

    Proposal: Hardware Wallets For Build And Test

    Hah! Thanks! You are great, and Your 'dashmnb' is a very usefull app. :)
  14. maky

    Proposal: Hardware Wallets For Build And Test

    Do You mean that masternodeprivkey is not created from certain mn adress? Just random?
  15. maky

    Proposal: Hardware Wallets For Build And Test

    I set 'dashmnb'. I get adres for 1k transfer but how to get masternodeprivkey with Your app?
  16. maky

    Proposal: Hardware Wallets For Build And Test

    I'm waiting for noob-proof solution but... Your job is great and it is obvious that You put a lot of job in existing solution so Thanks! :)
  17. maky

    Proposal: Hardware Wallets For Build And Test

    "Ledger nano s(no transaction yet)" - what does this mean?
  18. maky

    Proposal: Hardware Wallets For Build And Test

    Any changes in masternode from hardware-wallet problem? ;)
  19. maky

    Have 1000 DASH on Ledger nano s

    Any new info about Ledger or Trezor and starting masternodes?
  20. maky

    "watchdog-expired" on all masternodes after 12.1?

    Yeah, I did it already. I hoped that this is cause of our problem but it is not. I change it to correct and masternodes go to ENABLED but minute later some of them go WATCHDOG state again... PS. It seems that for me problem is solved. If not I let You know.
  21. maky

    "watchdog-expired" on all masternodes after 12.1?

    Maybe only I'm so stupid but... do You modify this below or just copy paste into cron like I do? */5 * * * * cd /home/YOURUSERNAME/.dashcore/sentinel && ./venv/bin/python bin/sentinel.py 2&>1 >sentinel-cron.log */5 * * * * cd /home/---------HERE---------/.dashcore/sentinel && ./venv/bin/python...
  22. maky

    "watchdog-expired" on all masternodes after 12.1?

    Do not have special chars in rpcuser and rpcpassword and WATCHDOG_EXPIRED problem.
  23. maky

    12.1 Migration - "Invalid protocol version"

    So I started it by start-alias. Should I stop it and start by start-missing? Do I understand it corectly: remote dash.conf - only two lines? (masternode=1 and privkey?)
  24. maky

    12.1 Migration - "Invalid protocol version"

    It might be that problem is solved. Thank You! Solution: dash.conf file is not needed again. Later I must start local DASH normal or in masternode-ready mode (with especially prepared dash.conf file). Now I create masternode.conf (I do not have it at all earlier). I run DASH normally, without...
  25. maky

    12.1 Migration - "Invalid protocol version"

    Yeah, I know masternode.conf, but something changed in dash.conf. For example: masternodeaddr=xxx.xxx.xxx.xxx does not work... rpcuser=..................................................... rpcpassword=........................................................... rpcallowip=127.0.0.1 listen=0...
  26. maky

    12.1 Migration - "Invalid protocol version"

    Do not have any alias in masternode.conf... I do not modify this file from about two years. Can You give me link to a proper .conf file for a today times? ;) https://www.dash.org/forum/threads/taos-masternode-setup-guide-for-dummies-updated.2680/
  27. maky

    12.1 Migration - "Invalid protocol version"

    Offline wallet is running 12.1 as a first instance and it is core. 18:49:49 masternode start-missing 18:49:49{ "overall": "Successfully started 0 masternodes, failed to start 0, total 0", "detail": { }} 18:49:58 masternode list-conf 18:49:58{}
  28. maky

    12.1 Migration - "Invalid protocol version"

    YES dash-cli getblockcount 616547
  29. maky

    12.1 Migration - "Invalid protocol version"

    Done already. "dash-cli getpeerinfo" show 70103 peers and one 70206... But DASHninja is showing: v0.12.1 p70103 ???
  30. maky

    12.1 Migration - "Invalid protocol version"

    dash-cli getinfo: "version": 120100, "protocolversion": 70206, "walletversion": 61000, "balance": 0.00000000, "privatesend_balance": 0.00000000, "blocks": 616511, "timeoffset": 0, "connections": 8, "proxy": "", "difficulty": 77817.46919843456, "testnet": false, "keypoololdest": 1415488991...
  31. maky

    v0.11.1 - InstantX Release

    Two updates in 5 minutes... ;)
  32. maky

    v0.11.1 - InstantX Release

    Done. ;)
  33. maky

    v0.11.1 - InstantX Release

    drk.mn - there is no mn with v11.1.19? Why? I upload v11.1.19 and is presented as v11.0.14...
  34. maky

    Polski MasterNode

    Muszą być nieruszane. Nie muszą i nie powinny być na VPN-ie tylko na jakimś bezpiecznym wallecie rzadko podłączanym do sieci. Walleta będziesz używał raz na ruski rok aby uruchomić masternoda. Zazwyczaj przy zmianie nr protokołu co odbywa się o wiele wiele rzadziej niż upgrady klienta darkcoina.
  35. maky

    Mandatory : All users must update to v0.11.1.x

    Do it thousand times with bitcoin, hundread with darkcoin and do mistake. Maybe is because of too much whiskey. ;) Now everything is OK with all my masternodes. Only this one I does it harder way. But it works too. ;)
  36. maky

    Mandatory : All users must update to v0.11.1.x

    F**k. I just erase everything except blockchain so do -reindex HARDER way. ;)
  37. maky

    Mandatory : All users must update to v0.11.1.x

    Darkcoin server stopping [email protected]:~$ ./darkcoind -rescan Darkcoin server starting [email protected]:~$ ./darkcoind getinfo { "version" : 110007, "protocolversion" : 70052, "walletversion" : 60001, "balance" : 0.00000000, "darksend_balance" : 0.00000000, "blocks" : 204572, "timeoffset"...