Search results

  1. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, If you've forgotten your password, you will need to reimage the micro sd card to reset everything back to factory default. Here is the DM22 Firmware 3.6.5 and a burning software to use. Afterwards, you can then update the miner to the latest firmware from the configuration page.
  2. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, I have heard recently that Nicehash is having issues with ASiC compatibility right now. It could be a temporary issue while they figure it out. After you updated to 3.6.11, did you reboot the miner? Try turning off the miner for 1 minute and then back on. If you are still getting the...
  3. I

    Hi, "Processing" means payment has been received and now waiting for your miner to be readied to...

    Hi, "Processing" means payment has been received and now waiting for your miner to be readied to ship. Usually this process will take about 10 business days. If you don't get any updates by next week, I will have someone look further into this issue. Please give me your order number so I can...
  4. I

    Hi, I will have someone look into that for you.

    Hi, I will have someone look into that for you.
  5. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, If you set the Static IP option, is the correct IP address set in the miner and the router? With a managed switch, there may be additional settings that need to be set to allow internet access. The DM11G works best if connected directly to the router or an unmanaged switch.
  6. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, This usually means there is an internet connection issue. The miners are not able to connect out to the internet. Please check the router settings to see if they are being blocked and if the IP settings are correct. You can also try re-imaging the firmware onto the tf card. Here is the...
  7. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, The DM11G is an older model and the limitations of the chips at that time limits the temperature to around 40C. The temperature is hard coded into the firmware and is not changeable. To reduce temperatures, you can try using A/C to cool down the room or use fans to push cold air to the...
  8. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, Try to refresh the page several times, sometimes the display is bugged or there is an issue getting the temperature reading. It should cause no issues with the miner if a few are showing -222 as the system still has temperature readings from other blades.
  9. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, Please see the post in the DM11G Support Thread.
  10. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Have you modified the firmware? Some of those headings displayed are not the regular displays of the DM11G. Can you please take a screenshot showing what firmware version you are using? You can try to re-image the TF card to iBeLink DM11G Firmware Version 3.5.25 and see if it resolves the...
  11. I

    Ibelink DSM6T Issues

    Hi, Try these steps to add a new pool. It is best to have the needed information in a text file first as the page will sometimes refresh while you are still entering information 1. Put in the pool url, pool username, and pool password. 2. Hit the "Add Pool" button. This should add your pool to...
  12. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, I have messaged you with information.
  13. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, I am not exactly sure you can add it up like that, but 1 fan is 90 CFM.
  14. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, i can't tell you much about the fan but the CFM of the fan is about 90. Hope that helps.
  15. I

    New iBeLink DM56G available.

    iBeLink is pleased to announce our new next Generation X11/Dash miner. The iBeLink DM56G is now available at our iBeLink.co website. The shipping deadline is May 31th, 2018. The new iBeLink™ DM56G has the following specifications: Hash Rate: 56 GH/s ±5% Power Consumption: 2100 W ±5% (at the...
  16. I

    iBeLink™ DM56G ASIC Dash Miner Support Thread

    This thread is created for iBeLink™ DM56G technical support. We will have technical persons monitoring this thread for various technical issues. Please study the User Guide and FAQ carefully on our website before using this ASIC miner. Resellers, sales, complaints, and discussions of our...
  17. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, As long as the miner is operating around 35C or below it should be fine. If the temperature gets too hot, the miner will automatically lower the PLL (speed of the chips) until it is cooler. Then the PLL will be returned to normal. There is also a new firmware version IB3.6.9. This fixes...
  18. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, To find the IP address of your 2nd iBeLink, you can try using Advanced IP scanner. It will scan your network for attached devices and gives you their IP address. If it does not show up, it could be that the previous owner set a static IP for the miner and you will need to re-flash the...
  19. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, Sure, I can give you steps on how to reflash the micro sd card. I assume you have a DM22G miner. 1. Open the miner and remove the micro SD card from the controller board. 2. Download the DM22G firmware IB3.6.5 and the burning software and instructions. 3. Use the burning software to flash...
  20. I

    Настройка кошелька dashcore для ibelink22g

    Hi, I believe you can not mine with the Dash Core wallet. If you would like to get more information, you can join the Dash Nation Discord at dashchat.org.
  21. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, The default username and password is both ibelink. If the password was changed and you don't remember it, you will need to reflash the sd card.
  22. I

    Настройка кошелька dashcore для ibelink22g

    Hi, If you are trying to configure the DM22G miner: Pool URL: address of where you are mining Pool User: dash wallet address or username if you signed up with the pool Pool Password: password for your username if you signed up with the pool or it can be anything
  23. I

    Настройка кошелька dashcore для ibelink22g

    Hi, Are you trying to configure the DM22G miner or are you trying to configure the Dash Core wallet? Can you provide a screenshot?
  24. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, If you are trying to sell something, please create your own thread so the selling/buying discussions don't clog up support discussions. Thank you.
  25. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, To everyone that runs the DM11G in temperatures near 0C or below but are getting high temperature readings, there is a fix to resolve this issue. I will create a zip file with instructions and replacement files soon. EDIT: The zip file can now be found on the first post of this thread as...
  26. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, It is possible it could be a bad temp sensor issue. I will report this again to the software team and have them check the firmware again. Thank you.
  27. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Please try refreshing the page, sometimes the temperature readings are not correct when first loaded after a restart. Also, please wait about 2 to 5 mins after it has restarted to check your PLL, it looks like it is still going through it's self test.
  28. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Unfortunately there is no way to disable temp control as it is used to protect the chips from overheating. The temp control only kicks in when it detects a temperature higher than 38C to 40C.
  29. I

    iBeLink™ DM22G ASIC Dash Miner Support Thread

    Hi, Can you please explain what it is doing? Are you getting error messages? Are your pool information not being saved?
  30. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, So it sounds like everything is ok, but gives false reading when the temperature goes below 0C. Is this correct? I will check with the software team about this issue.
  31. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Something is definitely wrong with those readings. Have you tried refreshing the page? Sometimes it needs a refresh to get the correct readings. You can also try to re-flash the TF card or use a TF card from another miner to see if it is also still giving you those temperatures. It could...
  32. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, If you are looking for mining pools, you can try out prohashing, p2pool, poolmining, or coinmine. You will have to try them out to find out which is best for you since it will be different for everyone.
  33. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Those fields are Rejected and Discards. Those are things that occur normally while mining. Discards are usually affected by communication with the pool due to latency. The more time it takes to communicate with the pool, the more likely the work from the block is invalid and will be...
  34. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, The #xnsub allows for better connections for coin switching pools. Normally without #xnsub, when it switch coins you disconnect from the pool and then reconnect. With #xnsub, you do not disconnect first from the pool. Our miners should have it enabled by default but you can still add it...
  35. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Glad to hear your miners are back up and working. We do the best we can to provide support. Happy New Year!
  36. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, Okay, I just wanted to make sure. Still waiting on the repair team but I will post updates when I hear from them.
  37. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, You mentioned that you put a new firmware onto the DM11G? What firmware version are you using because I believe the latest should be IB3.5.25 and there has not been any new updates. If you are trying to use the newer firmware for the DM22G on the DM11G, it will not work.
  38. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, The only way to check if the issue is from the PI board is to replace it with a good working one. How many units are having this issue? I am still checking with the repair team.
  39. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, How long after the machine starts up does it reboot? The self-test does take about 5mins to complete and will seem to reboot a few times.
  40. I

    iBeLink™ DM11G ASIC Dash Miner Support Thread

    Hi, What burning software do you use to burn the firmware? Do you use Win32 Disk Imager? The controller board will read the card on boot up. It should then start the cgminer software. I will see if the repair team has any other ideas on how to resolve this issue.